1.General Introduction
Honeywell BW Solo single gas detector is a portable type with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. it's the easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost. There is a complete with an extensive selection of sensor options, count on comprehensive detection, whether you are monitoring for common or exotic hazards.
Honeywell BW Solo single gas detector is also the first single-gas detector with the 1-Series sensor for CO, H2S and O2 which high accuracy, lower costs and fastersensor response time for the gases you monitor most often. It is compatible with IntelliDoX. Save time and centralize data
with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configuration software.
2.General Specifications
|
Items
|
BW Solo
|
|
Size
|
2.7 x 2.6 x 1.4 in. / 7.0 x 6.7x 3.6 cm (1-Series sensor models)
2.7 x 2.6 x 1.6 in. / 7.0 x 6.7x 4.1 cm (4-Series sensor models)
|
|
Weight
|
3.6 to 4.1 oz. / 103 to 116 g, depending on installed sensor
|
|
Humidity
|
0% - 95% RH (non-condensing)
|
|
Alarms
|
Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, non-compliance
|
|
Self -tests
|
Sensor integrity, circuitry, battery and audible/visual alarms on activation;
battery (continuous)
|
|
Battery Life
|
12 months (6 months for 1-Series O2)
|
|
Connected Worker
|
Bluetooth™ Low Energy (BLE) – Ability to connect to Honeywell’s Safety Communicator App
|
|
User Options
|
Reset TWA, STEL and Peak readings, Change High, Low, TWA and STEL alarm set points, Latching alarms, Enable IntelliFlash and non-compliance indicators, Set calibration and/or bump test reminders, Assign worker and location assignments
Language select: English, French, Spanish, German, Italian, Russian, Japanese, Chinese, Korean, Portuguese, Dutch
|
|
Ingress Protection
|
IP66/68
|
|
Certification Approvals
|
ATEX, SAA, IECEx, FCC ID, IC, RED
|
|
Warranty
|
3 years for 1-Series detectors and sensors (H2S, CO, O2)
2 years for 4-Series detectors and sensors
(1 year for NH3, Cl2, O3, ETO, ClO2 sensors)
|
3.Sensor Specifications
|
Gases
|
Standard Measuring Range
|
Resolution
|
Operating Temperature
|
|
H2S (1S)
|
0-200ppm
|
0.1ppm
|
-40 to +140°F /-40 to +60°C
|
|
CO (1S)
|
0-2000ppm
|
1ppm
|
-40 to +140°F /-40 to +60°C
|
|
O2 (1S)
|
0-30% v/v
|
0.1% v/v
|
-40 to +140°F /-40 to +60°C
|
|
CL2 (4S)
|
0-50ppm
|
0.1ppm
|
-4 to +104°F /-20 to +40°
|
|
CLO2 (4S)
|
0-1ppm
|
0.01ppm
|
-4 to +104°F /-20 to +40°
|
|
CO-H (4S)
|
0-2000ppm
|
0.5ppm
|
-22 to +122°F /-30 to +50°C
|
|
ETO (4S)
|
0-100ppm
|
0.1ppm
|
-22 to +122°F /-30 to +50°C
|
|
H2 (4S)
|
0-1000ppm
|
2ppm
|
-4 to +122°F /-20 to +50°
|
|
H2S (EXT.RANGE) (4S)
|
0-500ppm
|
0.1ppm
|
-40 to +122°F /-40 to +50°C
|
|
HCN (4S)
|
0-100ppm
|
0.1ppm
|
-22 to +122°F /-30 to +50°C
|
|
NH3 (4S)
|
0-100ppm
|
1ppm
|
-4 to +104°F /-20 to +40°
|
|
NH3 (EXT.RANGE) (4S)
|
0-1000ppm
|
1ppm
|
-4 to +104°F /-20 to +40°
|
|
NO (4S)
|
0-250ppm
|
0.2ppm
|
-22 to +122°F /-30 to +50°C
|
|
NO2 (4S)
|
0-100ppm
|
0.1ppm
|
-4 to +122°F /-20 to +50°
|
|
O3 (4S)
|
0-1ppm
|
0.01ppm
|
-22 to +122°F /-30 to +50°C
|
|
PH3 (4S)
|
0-5ppm
|
0.1ppm
|
-4 to +122°F /-20 to +50°
|
|
SO2 (4S)
|
0-100ppm
|
0.1ppm
|
-22 to +122°F /-30 to +50°C
|
|
H2S (4S)
|
0-100ppm
|
0.1ppm
|
-40 to +140°F /-20 to +50°C
|
|
CO (4S)
|
0-1000ppm
|
1ppm
|
-40 to +140°F /-20 to +50°C
|
|
O2 (4S)
|
0-30% v/v
|
0.1% v/v
|
-40 to +140°F /-20 to +50°C
|